ASRock Steel Legend SL-850G 850W ATX 80+ Gold black

Verze ATX: 3.1
certifikace: 80PLUS Gold
Form faktor: ATX
Výkon (Watt): 850
Lüfter: 1x
EPS12V: 2x 4+4pin
Peripheral P4: 3x 4pin
S-ATA: 9x 5pin
ATX-Mainboard: 1x 24pin
PCIe: 3x 6+2pin
16-Pin (12V-2×6, PCIe 5.1): 1x
Proudové špičky (OCP): ano
Přetížení (OVP): ano
Přehřátí (OTP): ano
Podpětí (UVP): ano
Zkrat (SCP): ano
Přetížení (OPP): ano
Síťový vypínač: ano
Životnost / MTBF (hod): 100000
Typ PFC (Power Factor Correction): Aktiv-PFC
Vedení kabelů: plně modulární
Ventilátor (počet): 1
Průměr větráku (mm): 135
Způsob chlazení: polopasivní
Vstupní frekvence (Hz): 50 - 60
Intenzita proudu (amper): 12 / 6
Vstupní napětí (V): 100 - 240
Výška (mm): 86
Barva: černá
Hloubka (mm): 150
Šířka (mm): 150

ASRock Steel Legend ATX 80+ Gold Power Supply SL-850G
A stable power supply is the basis for reliable PC operation. This power supply is designed for modern hardware and supports high load changes from today’s components. The wide AC input of 100–240 volts allows flexible use in different power grids. With a strong focus on constant 12-volt output, this model is suitable for high-performance systems.
Designed for modern platforms The ATX 12V Version 3.1 ensures compatibility with new motherboards and graphics cards. A continuous 12-volt output of 83.4 amperes provides stable power even under high CPU and GPU load. The total power excursion of 200% helps to handle short load peaks. This is especially useful for demanding applications and gaming.
Efficiency and everyday use The power supply reaches Gold-level efficiency according to the 80 Plus standard. In addition, a Cybenetics rating of PLATINUM / A (ETA/LAMBDA) is listed. The integrated iCOOL mode allows adjusted fan control via a switch. This lets you adapt operation to different usage scenarios.
Cooling and protection features A 135 mm axial fan with stripe design and FDB bearing supports even airflow. Comprehensive protection circuits such as OCP, SCP, OVP, UVP, OTP and OPP help to protect connected components. All built-in capacitors are made in Japan. This supports stable electrical performance during long-term use.
Connections and long-term operation The connector setup supports modern and classic components, including a PCIe 5.1 connector. An integrated 5V boost helps to keep voltages stable for peripherals. The stated MTBF of 100,000 hours at 25 °C shows the focus on continuous operation. The compact dimensions make installation easier in common cases.
Features:
Gold-level efficiency according to the 80 Plus standard, helps to save energy under load Cybenetics rating ETA/LAMBDA PLATINUM / A for clear efficiency and noise evaluation ATX 12V Version 3.1 allows use with modern motherboards and graphics cards Continuous 12-volt output with 83.4 amperes supports powerful CPU and GPU setups Total power excursion of 200% helps with short load peaks of modern hardware 135 mm axial fan with FDB bearing supports even and stable cooling operation iCOOL mode via switch allows adjusted fan control depending on usage Comprehensive protection circuits such as OCP, SCP, OVP, UVP, OTP and OPP help to protect components All capacitors made in Japan support consistent electrical values Integrated 5V boost, useful for stable power supply to drives and peripherals PCIe 5.1 connector available, but without Cable-TempGuard monitoring Dimensions (W x H x D): 150 x 86 x 150 mm